2024
J. Yun, B. Chun, H.W. Jung, “Role of evaporation and sedimentation rates on particle distribution and microstructure in colloidal films,” Submitted (2024).
B.U. Kim, J.H. Lee, H.W. Jung, Y.M. Jo, S.B. Kim, “Kinetic study on the removal of low-concentration VOCs in indoor air using DBD plasma and photocatalytic degradation,” Submitted (2024).
B. Chun, H.W. Jung, “Near-wall dynamics of non-Brownian rod-like particle suspensions in confined shear flows,” Submitted (2024).
D. Kim, H.-S. Song, H.W. Jung, “Optimizing dual-shim configurations for non-Newtonian coating liquids in the slot coating process of PEM fuel cells using artificial neural networks,” Submitted (2024).
S. Jee, H.W. Jung, “Characterizing start and end edges in intermittent slot coating processes via coating bead flow dynamics,” European Physical J. Special Topics, Accepted (2024).
K. Choi, J. Gil, J. Ju, Z. Li, H.W. Jung, J. Bang, “Enhanced extrusion processability of PLA blends through rheology control using biodegradable bottlebrush polymers,” Submitted (2024).
U. Hwang, HY. Moon, J. Park, H.W. Jung, “Crosslinking and swelling properties of pH-responsive poly(ethylene glycol)/poly(acrylic acid) interpenetrating polymer network hydrogels,” Polymers, 16, 2149 (2024).
H. Kim, H.-S. Cho, S.-K. Kim, H.W. Jung, J. Park, “Techno-economic and uncertainty analysis of green hydrogen production via proton exchange membrane electrolysis focusing on variations in costs and renewable energy sources,” Submitted (2024).
S.H. Kim*, D. Kim*, H.W. Jung, “Effect of poly(vinyl alcohol) on the rheological and drying properties of aqueous ceria-based suspensions under various pH conditions,” Submitted (2024).
M. Park*, H.Y. Moon*, H.W. Jung, H.-j. Paik, S.M. Noh, “Characteristics of colorless fluorinated imide-based oligomers for UV-curing coatings,” ACS Appl. Polym. Mater., 6, 11039-11049 (2024).
J. Shin*, H.Y. Moon*, S. Jee, K.C. Lee, H.W. Jung, H.-j. Paik, S.M. Noh, “Characteristics of phosphorus-nitrogen based flame-retardant monomers for UV-curable coatings on battery PET pouches,” Prog. Org. Coat., 195, 108665 (2024).
J.Y. Lee, S.H. Kim, S.-E. Park, J.S. Lee, H.W. Jung, “Rheological and light scattering analyses for characterizing phase separation of polymer solutions in lithium-ion battery separator coating system,” Korea-Australia Rheol. J., 36, 179-192 (2024).
S.H. Kim*, Y. Huh*, B.S. Park, K.I. Jung, Y.-Y. Won, J. Bang, H.W. Jung, “Tunable coffee-ring patterns of sessile suspension droplets through silica particle encapsulation with thermo-responsive block copolymers,” Chem. Eng. J., 494, 152929 (2024).
S.K. Kim, J. Lee, D. Son, DH Kang, H. W. Jung, J.K. Shim, “Controlling grafting density of compatibilizer to enhance performance of thermoplastic starch/poly(butylene adipate-co-terephthalate) blends,” Polymer, 307, 127242 (2024).
Z. Yang, T. Patel, A. Thinphang-Nga, A. Nizami, J. Park, Z. Ye, H.W. Jung, G. Peslherbe, J.K. Oh, X. Li, “Nanoscale encapsulation of sulfur cathode via self-healing and polar synergistic multi-functional coating for high-performance Li-S batteries,” ACS Appl. Nano Mater., Accepted (2024).
J. Gil, G. Park, H.S. Lee, H.W. Jung, “Effect of fiber orientation on spinning dynamics for liquid crystalline polymer solutions using mesoscopic theory,” Rheol. Acta, 63, 529-539 (2024).
H. Jae*, J. Park*, J. Byun, W.S. Chi, J.H. Kim, H.W. Jung, D. Rho, “Dual-cured organic-inorganic hard coating with high flexibility and transparency based on polysilsesquioxane and a functional polymer,” Prog. Org. Coat., 191, 108416 (2024).
H. Kwon, Y. Kim, J. Bae, S.H. Bae, J.H. Park, K. Choi, P.H. Hong, M.J. Ko, J. Ryu, H.W. Jung, S.W. Hong, “A bionanocomposites based on cellulose nanofibers modified by a sustainable heterocyclic dispersing agent with outstanding mechanical properties,” Chemical Engineering Journal, 487, 150360 (2024).
T.H. Lee*, H.Y. Moon*. H.W. Jung, S.M. Noh, “Low-temperature crosslinking characteristics of interpenetrating polymer networks with dual-curable amine-based blocked isocyanate for automotive 1K clearcoats,” Materials Today Communications, 38, 108450 (2023).
D. Oh*, J. Park*, Y.K. Song, S.M. Noh, H.W. Jung, “Crosslinking characteristics of aziridine crosslinkers in polyurethane-based clearcoats for automotive applications,” J. Coat. Technol. Res., 21, 1893-1906 (2024).
Y.H. Park, W. Cho, S. Bae, H.W. Jung, S. Lee, “Low-temperature thermal cross-linkable materials with benzocyclobutene groups for solution process of OLEDs,” Synthetic Metals, 303, 117560 (2024).
J. Yun, B. Chun, H.W. Jung, J.C. Hyun, “Emergence of cooperative particle dynamics in quasi-two-dimensional glass-forming colloidal suspensions,” Physics of Fluids, 36, 013311 (2024).
D.W. Lee*, S. Kim*, J. Park*, H.W. Jung, H.-J. Paik, S.M. Noh, “Characteristics of novel cycloaliphatic epoxides based on UV-induced cationic ring-opening polymerization for plastic coatings,” Prog. Org. Coat., 188, 108202 (2024).
G. Park, H.S. Ji, J.S. Lee, H.W. Jung, J.C. Hyun, “Effect of die exit flow condition on air-gap film dynamics in two-dimensional film casting processes,” J. Non-Newtonian Fluid Mech., 324, 105182 (2024).
D. Son, J. Lee, S.K. Kim, J. Hong, H.W. Jung, J.K. Shim, D. Kang, “Effect of cellulose nanofiber-montmorillonite hybrid filler on the melt blending of thermoplastic starch composites,” Int. J. Biological Macromol., 254, 127236 (2024).
2023
C.E. Lee, H. Cho, H. Moon, S.H. Gong, S. Shin, S. Lee, H.W. Jung, J. Hwang, H.-S. Kim, “Understanding the influence of microporosity in aqueous/non-aqueous supercapacitors by ionic liquid controlled hierarchical porous carbon nanofiber/MnO2 composites,” Submitted (2023).
T. Patel, J. Park, M.P. Kim, Z. Ye, H. Ko, H.W. Jung, J.K. Oh, “Dynamic poly(hindered urea) hybrid network materials crosslinked with reactive methacrylate polymer,” Polym. Chem., 14, 5115-5124 (2023).
Y. Lee*, S.H. Kim*, S.J. Lee, J. Bang, H.W. Jung, “Light-scattering analysis of drying behavior in suspension droplets with silica and polystyrene particles and a hydrosoluble polymer,” Langmuir, 39, 17222-17231 (2023).
H.S. Ji, H.W. Jung, “Effect of the multiple injection process on the structural and mechanical properties of PP impact copolymers focusing on the deformation of ethylene-propylene copolymer,” Polymer Testing, 124, 108051 (2023).
S.K. Kim, H.W. Jung, D. Son, J.H. Han, DH Kang, S.I. Kang, J. Lee, J.K. Shim, “In situ reactive compatibilization of TPS/PBAT with robust water resistance performance,” ACS Appl. Polym. Mater., 5, 5445-5453 (2023).
W. Choi, M.G. Shin, G.W. Lee, D. Kim, C.H. Yoo, J.S. Lee, H.W. Jung, J.-H. Lee, “Anisotropic biofouling behavior of sharkskin-patterned desalination membranes,” J. Membrane Sci, 683, 121814 (2023).
G.W. Lee, S.H. Kim, D.Y. Lee, B. Chun, K.-Y. Lee, H.W. Jung, “Effect of solution pH on the microstructural and rheological properties in boehmite suspensions,” Korea-Australia Rheol. J., 35, 1-10 (2023).
G.W. Lee, B. Chun, H.W. Jung, “Lattice Boltzmann modeling and analysis of ceramic filtration with different pore structures,” Korean. J. Chem. Eng, 40, 1309-1316 (2023).
J. Park, D.W. Lee, S.M. Noh, H.W. Jung, “Optimal combination of UV-induced cationic ring operning polymerization monomers for light-weight automotive plastic coating,” J. Appl. Polym. Sci., 140, e53980 (2023).
S.H. Kim*, G. Park*, K.-B. Kim, Y.-W. Shin, H.W. Jung, “Optoelectrical properties of transparent conductive films fabricated with Ag nanoparticle-suspended emulsion under various formulations and coating conditions,” Nanomaterials, 13, 1191 (2023)
B. Chun, H.W. Jung, “Universal flow-induced orientational ordering of colloidal rods in planar shear and extensional flows: dilute and semi-dilute concentrations,” J. Rheol., 67, 315-330 (2023).
H.S. Ji, H.W. Jung, “Simulation of injection modeling process considering rheological properties of polypropylenes,” Polymer-Korea, 47, 99-107 (2023)
H.Y. Moon, S.M. Noh, H.W. Jung, “Thermal crosslinking characteristics of dual-curable isocyanate blocked with methacrylate-functionalized amine derivatives for eco-friendly automotive clearcoats,” Appl. Surf. Sci., 607, 155058 (2023).
S.H. Gong, H.J. Lim, J.H. Lee, Y. Yoo, S. Y, H.-D. Lim, H.W. Jung, J.S. Ko, I.S. Kim, H.-S. Kim, “Electrochemical assessment of hihgly reversible SnO2-coated Zn metal anodes prepared via atomic layer deposition for aqueous Zn-ion batteries,” Appl. Surf. Sci., 611, 155633 (2023).
2022
S.H. Kim, G.W. Lee, B. Chun, K.-Y. Lee, H.W. Jung, “Rheological behavior and drying characteristics of ceria-based suspensions under various pH conditions,” Powder Technology, 412, 117984 (2022).
H.S. Ji, G. Park, H.W. Jung, “Rheological properties and melt spinning application of controlled-rheology polypropylenes via pilot-scale reactive extrusion,” Polymers, 14, 3226 (2022).
H. Kwon, S. Kang, K.I. Jung, Y.I. Park, S.M. Noh, H.W. Jung, J. Park, “New thermal-latent titanium metal catalyst using dual curing reaction for electroactive polymers,” Molecular Crystals and Liquid Crystals, 733, 86-92 (2022).
P. Nellepalli, T. Patel, M.P. Kim, J.Park, Z. Ye, H.W. Jung, H. Ko, J.K. Oh, “Self-healable triboelectric nanogenerators based on ionic poly(hindered urea) network materials cross-linked with fluorinated block copolymers,” Polym. Chem., 13, 4343-4351 (2022).
P. Nellepalli, M.P. Kim, J. Park, S.M. Noh, Z. Ye, H.W. Jung, H. Ko, J.W. Oh,”Dynamic and reprocessable fluorinated poly(hindered urea) network materials containing ionic liquids to enhance triboelectric performance,” ACS Appl. Mater. Interfaces, 22, 17806-17817 (2022)
J.S. Park, S. Jee, B. Chun, H.W. Jung, “Practical operations for intermittent dual-layer slot coating processes,” Korea-Australia Rheology Journal, 34, 181-186 (2022).
J.S. Park, J. Yun, B. Chun, H.W. Jung, “Mild stratification in drying film of colloidal mixtures,” Soft Matter, 18, 3487-3497 (2022).
J.S. Park, T. Yoo, B. Chun, K.-Y. Lee, H.W. Jung, “Operability limits for non-Newtonian liquids in dual-layer slot coating processes using the viscocapillary model,” J. Coatings Tech. Res., 19, 35-47 (2022).
K.I. Jung, J.U. Hong, S.M. Noh, H.W. Jung, “Crosslinking characteristics of dual-curable blocked isocyanate with thermal radical initiator for low-temperature curing of automotive clearcoats,” Prog. Org. Coat., 163, 106611 (2022).
T. Yoo, B. Chun, H.W. Jung, “Vertical drying model for colloidal films during rapid evaporation processes,” Drying Technology, 40(3), 516-526 (2022).
J. Je, H. Lim, H.W. Jung, S.-O. Kim, “Ultrafast and ultrastable heteroarchitectured porous nanocube and anode composed of CuS/FeS2 embedded in nitrogen-doped carbon for use in sodium-ion batteries,” Small, 18, 2105310 (2022).
2021
Y.-G. June, K.I. Jung, T.H. Lee, M. Ha, S.M. Noh, H.W. Jung, “Effect of isocyanate crosslinkers blocked with amine derivatives on rheological and crosslinking characteristics of automotive clearcoats,” Korea-Australia Rheology J., 33, 37-43 (2021).
G. Park, J. Yun, C. Lee, H.W. Jung, “Effect of extensional deformation in spinline on the draw resonance instability of viscoelastic Giesekus fluids in melt spinning process,” Polymers, 13, 139 (2021).
Y.-G. June*, K.I. Jung*, D.G. Lee, S. Jeong, T-H. Lee, Y.I. Park, S.M. Noh, H.W. Jung, “Influence of the functional group content of hydroxyl functionalized urethane methacrylate oligomers on the crosslinking features of clearcoats,” J. Coat. Technol. Res., 18, 229-237 (2021).
J. Sung, J. Park, H.W. Jung, “Coating of heat-resistant polymeric layer to enhance thermal stability of microporous polyethylene separator for lithium-ion secondary battery” Polymer-Korea, 45, 456-463 (2021).
B. Chun, H.W. Jung, “Inertia- and shear-induced inhomogeneities in non-Brownian mono and bidisperse suspensions under wall-bounded linear shear flow,” Physics of Fluids, 33, 053318 (2021).
J.H. Lee, H.W. Jung, I.S. Kim, M. Park, H.-S. Kim, “Electrochemical evaluation of surface modified free-standing CNT electrode for Li-O2 battery cathode,” Energies, 41, 4196 (2021).
B.N. Jung, H.W. Jung, D. Kang, G.H. Kim, J.K. Shim,”A study on the oxygen permeability behavior of nanoclay in a polypropylene/nanoclay nanocomposite by biaxial stretching,” Polymers, 13, 2760 (2021).
J. Park, N. Kim, K.I. Jung, S. Yoon, S.M. Noh, J. Bang, H.W. Jung,”Effect of silica nanoparticles blocked with epoxy groups on the crosslinking and surface properties of PEG hydrogel films,” Polymers, 13, 3296 (2021).
C.H. Yoo*, G.W. Lee*, W. Choi, M.G. Shin, C. Lee, J.H. Shin, Y. Son, B. Chun, J.-H. Lee, H.W. Jung, J.S. Lee, “Identifying the colloidal fouling behavior on the sharkskin-mimetic surface: In-situ monitoring and lattice Boltzmann simulation,” Chemical Engineering J., 405, 126617 (2021).
2020
J. Kim, P.H. Hong, K. Choi, G. Moon, J. Kang, S. Lee, S. Lee, H.W. Jung, M.J. Ko, S.W. Hong, “A heterocyclic polyurethane with enhanced self-healing efficiency and outstanding recovery of mechanical properties”, Polymers, 12, 968 (2020).
H.W. Jung, “Special Issue on “Thin Film Processes” (Editorial), Processes, 8, 564-565 (2020).
B.N. Jung, H.W. Jung, D.H. Kang, G.H. Kim, J.K. Shim, “Synergistic effect of cellulose nanofiber and nanoclay as distributed phase in a polypropylene based nanocomposite system,” Polymers, 12, 2399 (2020).
J. Oh*, S.H. Kim*, K.I. Jung, J. Huh, H.W. Jung, J. Bang, “Effect of photo-initiators on the crosslinking behavior of organic thin films and their applicability to flexible display encapsulation layer,” Polymer-Korea, 44, 841-847 (2020).
Y.-G. June, K.I. Jung, M. Choi, T.-H. Lee, S.M. Noh, H.W. Jung, “Effect of urethane crosslinking by blocked isocyanates with pyrazole-based blocking agents on rheological and mechanical performance,” Coatings, 10, 961 (2020).
T. Patel, M.P. Kim, J. Park, T.H. Lee, P. Nellepalli, S.M. Noh, H.W. Jung, H. Ko, J.K. Oh, “Self-healable reprocessable triboelectric nanogenerators fabricated with vitrimeric poly(hindered urea) networks,” ACS Nano, 14, 11442-11451 (2020).
M. Choi, M.G. Kim, K.I. Jung, T.-H. Lee, M. Ha, W. Hyung, H.W. Jung, S.M. Noh, “Reactivity and curing efficiency of isocyanate crosslinkiers with imidazole-based blocking agents for low-temperature curing of automotive clearcoats,” Coatings, 10, 974 (2020).
J. Sung, D.G. Lee, S. Lee, J. Park, H.W. Jung, “Crosslinking dynamics and gelation characteristics of photo and thermally polymerized poly(ethylene glycol) hydrogels,” Materials, 13, 3277 (2020).
K.I. Jung, B.S. Park, S.J. Lee, S.M. Noh, H.W. Jung, “Effect of immiscible secondary fluid on particle dynamics and coffee ring characteristics during suspension drying,” Materials, 13, 3438 (2020).
Y.-G. June, K.I. Jung, T.H. Lee, M. Ha, S.M. Noh, H.W. Jung, “Effect of isocyanate crosslinkers blocked with amine derivatives on rheological and crosslinking characteristics of automotive clearcoats,” Korea-Australia Rheology J., 33, 37-43 (2020).
K. Yoon, H.W. Jung, M.-S. Chun, “Two-phase flow in microfluidic-chip design of hydrodynamic filtration for cell particle sorting,” Electrophoresis, 41, 1002-1010 (2020).
S.H. Kim*, D.G. Lee*, J.W. Lee, D.G. Oh, I.Son, J.H. Lee, H. Kim, H.W. Jung, “Relationship between crosslinking and rheological/mechanical properties of UV curable coatings for automotive interior plastic parts,” Polymer-Korea, 44, 38-48 (2020).
K. Yoon, H.W. Jung, M-S. Chun, “Secondary Dean flow characteristics of inelastic Bird-Carreau fluids in curve microchannels,” Korea-Australia Rheology J., 32, 61-70 (2020).
K. Yoon, H.W. Jung, M-S. Chun, “Determination of velocity profiles of Bird-Carreau fluids in curvilinear microchannel using random sample consequence,” Korea-Australia Rheology J., 32, 159-164 (2020).
D.G. Lee, S. Sung, D.G. Oh, Y.I. Park, S.-H. Lee, J.C. Kim, S.M. Noh, H.W. Jung, “Application of polycarbonate diol containing hindered urea to polyurethane-based clearcoats for tuning of scratch-healing properties,” J. Coat. Technol. Res. 17, 963-976 (2020).
B.N. Jung, H.W. Jung, D. Kang, G.H. Kim, M. Lee, S.W. Hwang, J.K. Shim, “The fabrication of affinity improved nanocomposites with plasma treated polypropylene and alkaline cellulose nanofiber suspension,” Polymer Testing, 85, 106352 (2020).
W. Choi, C. Lee, C.H. Yoo, M.G. Shin, G.W. Lee, T.-S. Kim, H.W. Jung, J.S. Lee, J.-H. Lee, “Structural tailoring of sharkskin-mimetic patterned reverse osmosis membranes for optimizing biofouling resistance,” J. Membrane Science, 595, 117602 (2020).
C. Lee, G.W. Lee, W. Choi, C.H. Yoo, B. Chun, J.S. Lee, J.-H. Lee, H.W. Jung, “Pattern flow dynamics over rectangular Sharklet patterned membrane surfaces,” Applied Surface Science, 514, 145961 (2020).
M.J. Kim, G.-H. Han, S.H. Lee, H.W. Jung, J.W. Choung, C.H. Kim, K.-Y. Lee, “CeO2 promoted Ag/TiO2 catalyst for soot oxidation with improved active oxygen generation and delivery abilities,” J. Hazardous Materials, 384, 121341 (2020).
B.N. Jung, H.W. Jung, D.H. Kang, G.H. Kim, M. Lee, J.K. Shim, S.W. Hwang, “The fabrication of flexible and oxygen barrier celluose nanofiber/polylactic acid nanocomposites using cosolvent system,” J. Appl. Polym. Sci., 137, e49536 (2020).
B. Chun, T. Yoo, H.W. Jung, “Temporal evolution of concentration and microstructure of colloidal films during vertical drying: A lattice Boltzmann simulation study,” Soft Matter, 16, 523-533 (2020).
2018-2019
J. Oh, K.I. Jung, H.W. Jung, A. Khan, “A modular and practical synthesis of zwitterionic hydrogels through sequential amine-epoxy ‘click’ chemistry and N-alkylation reaction,” Polymers, 11, 1491 (2019).
B. Chun, J.S. Park, Y.-Y. Won, H.W. Jung, “Shear-induced particle migration and segregation in non-Brownian bidisperse suspensions under planar Poiseuille flow,” Journal of Rheology, 63, 437-453 (2019).
N. Kim, S. Kim, K.I. Jung, D.G. Lee, J. Bang, H.W. Jung, “Crosslinking behaviors and mechanical properties of curable PDMS and PEG films with various contents of glycidyl methacrylate,” J. Appl. Polym. Sci., 136, 47088 (2019).
W.-G. Ahn*, S.H. Lee*, J. Nam, B. Chun, H.W. Jung, “Simultaneous analysis of die internal and external flows in slot coating process,” Journal of Chemical Engineering of Japan, 52(3) 253-258 (2019).
B.S. Park, W.-G. Ahn, K.I. Jung, S.J. Lee, K.-Y. Lee, H.W. Jung, “Analysis of the drying behavior of suspension drops with spherical and ellipsoidal particles,” Drying Technology, 36, 2022-2029 (2018).
W. Choi, C. Lee, Y.J. Won, D. Lee, G.W. Lee, M.G. Shin, T.-S. Kim, H.-D. Park, H.W. Jung, J.S. Lee, J.-H. Lee, “Sharkskin-mimetic water desalination membranes with ultralow biofouling,” J. Mater. Chem. A, 6, 23034 (2018).
K.I. Jung*, S.O. Hwang*, N.H. Kim, D.G. Lee, J.-H. Lee, H.W. Jung, “Effect of methacryloxypropyl and phenyl functional groups on crosslinking and rheological and mechanical properties of ladder-like polysilsesquioxane hard coatings,” Prog. Org. Coat., 124, 129-136 (2018).
K.I. Jung, B. Kim, D.G. Lee, T-H Lee, S.Y. Choi, J.C. Kim, S.M. Noh, Y.I. Park, H.W. Jung, “Characteristics of dual-curable blocked isocyanate with thermal radical initiator for low-temperature curing of automotive coatings,” Prog. Org. Coat., 125, 160-166 (2018).
W.-G. Ahn, S. H. Lee, J. Nam, S.J. Kim, K.-Y. Lee, H.W. Jung, “Effect of upstream meniscus shape on dynamic wetting and operability limits of Newtonian coating liquids in slot coating bead flows,” J. Coatings Technology and Research, 15, 1067-1076 (2018).
J. Hwang, D.G. Lee, H. Yeo, J. Rao, Z. Zhu, J. Shin, K. Jeong, S. Kim, H.W. Jung, A. Khan, “Proton transfer hydrogels: Versatility and applications,” J. Am. Chem. Soc., 140, 6700-6709 (2018).
S.O. Hwang, A.S. Lee, S.-H. Park, J.-Y. Lee, I. Jung, H.W. Jung, J.-H. Lee, “Mechanical properties of ladder-like polysilsesquioxane-based hard coating films containing different organic functional groups,” Prog. Org. Coat., 121, 105-111 (2018).
S.H. Yoon, D.G. Lee, N.H. Lee, K.I. Jung, C.S. Lee, J.W. Lee, G.S. Lee, H.W. Jung, “The relationship between curing characteristics and rheological / mechanical properties of soft-feel coatings for automotive plastic parts,” Polymer-Korea, 42, 303-310 (2018).
I. Kwon, M.-S. Chun, B. Chun, H.W. Jung, J.C. Hyun, “Particle migration in planar Couette-Poiseuille flows of concentrated suspensions,” J. Rheol., 62, 419-435 (2018).
B.S. Park, K.H. Hyung, G.J. Oh, H.W. Jung, “Transitional analysis of organic thin color filter layers in displays during baking process using multi-speckle diffusing wave spectroscopy,” Korea-Australia Rheol. J. (Invited paper for ISAR-2017), 30(1), 11-19 (2018).
D.Y. Lee, G. Lee, K. Yoon, B. Chun, H.W. Jung, “Lattice Boltzmann simulations for wall-flow dynamics in porous ceramic diesel particulate filters,” Applied Surface Science, 429, 72-80 (2018).
B.S. Park, K.I. Jung, S.J. Lee, K.-Y. Lee, H.W. Jung, “Effect of particle shape on drying dynamics in suspension drops using multi-speckle diffusing wave spectroscopy,” Colloid and Polymer Science, 296, 971-979 (2018).
2016-2017
B.S. Park, K.H. Hyung, G.J. Oh, H.W. Jung, “Dynamic change of color filter layer in baking process by multi-speckle diffusing wave spectroscopy,” Chem. Eng. & Technol., 40, 2230-2237 (2017).
K. Yoon, H.W. Jung, M.-S. Chun, “Secondary flow behavior of electrolytic non-Newtonian fluids with Bird-Carreau model in curved microchannels,” Rheol. Acta, 56, 915-926 (2017).
B. Chun*, I. Kwon*, H.W. Jung, J.C. Hyun, “Lattice Boltzmann simulation of shear-induced particle migration in plane Couette-Poiseuille flow: Local ordering of suspension,” Phys. Fluids (Special Issue of INNFM-2017) (2017), 29, 121605 (2017).
J.S. Lee, I. Kwon, H.W. Jung J.C. Hyun, “Helical instability in film blowing process: Analogy to buckling instability,” Phys. Fluids (Special Issue of INNFM-2017), 29, 121501 (2017).
Y.W. Lee, W.-G. Ahn, J. Nam, H.W. Jung, J.C. Hyun, “Operability windows in viscoelastic slot coating flows using a simplified viscoelastic-capillary model,” Rheol. Acta, 56(9), 707-717 (2017).
Kevin I. Jung, D.G. Lee, K.W. Bong, S.M. Noh, M.S. Um, W.J. Choi, B. Kim, H.W. Jung, “Effect of solvents on the rheological and crosslinking properties of photo-polymerized poly(ethylene glycol) hydrogels,” Korean J. Chem. Eng., 34(5), 1517-1523 (2017).
J.H. Shim, H.J. Moon, H.W. Jung, K. Bong, “Fabrication of NOA microfluidic devices based on sequential replica molding,” Korean J. Chem. Eng., 34(5), 1495-1499 (2017).
S.-J. Park*, W.-G. Ahn*, W. Choi, S.-H. Park, J.S. Lee, H.W. Jung, J,-H. Lee, “A facile and scalable fabrication method for thin film composite reverse osmosis membranes: dual-layer slot coating,” J. Mater. Chem. A, 5, 6648-6655 (2017).
I. Kwon, B. Chun, M.-S. Chun, H.W. Jung, J.C. Hyun, “Sensitivity analysis of two-dimensional viscoelastic film casting processes using transfer functions by transient frequency response method,” Korea-Australia. Rheol. J., 29(1), 67-73 (2017).
I. Kwon, H.W. Jung, J.C. Hyun, “Stability windows for draw resonance instability in two-dimensional Newtonian and viscoelastic film casting processes by transient frequency response method,” J. Non-Newtonian Fluid Mech., 240, 34-43 (2017).
D. Kim*, D.G. Lee*, J.C. Kim, C.S. Lim, N.S. Kong, H.W. Jung, S.M. Noh, Y.I. Park, “Effect of molecular weight of polyurethane toughening agent on adhesive strength and rheological characteristics of automotive structural adhesives,” Int. J. Adhes. Addhes., 74, 21-27 (2017).
G.J. Oh, J.W. Hwang, S.J. Lee, K.W. Bong, H.W. Jung, “Particle dynamics and relaxation in bimodal polystyrene suspensions during drying using multi-speckle diffusing wave spectroscopy,” AIChE J., 63(3), 1114-1121 (2017).
W. Choi, E.P. Chan, J.-H. Park, W.-G. Ahn, H.W. Jung, S. Hong, J.S. Lee, J.-Y. Han, S. Park, D.-H. Ko, J.-H. Lee, “Nanoscale pillar-enhanced tribological surfaces as antifouling membranes,” ACS Applied Materials & Interfaces, 8(45), 31433-31441 (2016).
D.G. Lee, S.Y. An, M.S. Um, W.J. Choi, S.M. Noh, H.W. Jung, J.K Oh, “Photo-induced thiol-ene crosslinked polymethacrylate networks reinforced with Al2O3 nanoparticles,” Polymer, 101, 119-126 (2016).
B. Kim*, D.G. Lee*, D.Y. Kim, H.J. Kim, N.S. Kong, J.C. Kim, S.M. Noh, H.W. Jung, Y.I. Park, “Thermal radical initiator derivatives based on O-imino-isourea: Synthesis, polymerization, and characterization,” J. Polym. Sci – Part A: Polym. Chem., 54, 3593-3600 (2016)
M.S. Um, D.S. Ham, S.G. Cho, S.J. Lee, K.J. Kim, J.H. Lee, S.-H. Choa, H.W. Jung, W.J. Choi, “Surface mechanical properties of poly(urethane acrylate)/silica hybrid interpenetrating polymer network (IPN) coatings,” Prog. Org. Coat., 97, 166-174 (2016).
H.S. Ji, W.-G. Ahn, I. Kwon, J. Nam, H.W. Jung, “Operability coating window of dual-layer slot coating process using viscocapillary model,” Chem. Eng. Sci., 143, 122-129 (2016).
I. Kwon, M.-S. Chun, H.W. Jung, J.C. Hyun, “Determination of draw resonance onsets in tension-controlled viscoelastic spinning process using transient frequency response method,” J. Non-Newtonian Fluid Mech., 228, 31-37 (2016).
G. Jin, W.-G. Ahn, S.J. Kim, J. Nam, H.W. Jung, J.C. Hyun, “Effect of shim configuration on internal die flows for non-Newtonian coating liquids in slot coating process,” Korea-Australia Rheol. J., 28(2), 159-164 (2016)
2012-2015
W.-G. Ahn, S. H. Lee, J. Nam, H.W. Jung, “Effect of flow rate variation on the frequency response in slot coating with upstream sloped die geometry,” Korean J. Chem. Eng., 37(7), 1218-1221 (2015).
J.W. Hwang, S.M. Noh, B. Kim, H.W. Jung, “Gelation and crosslinking characteristics of photo-polymerized poly(ethylene glycol) hydrogels,” J. Appl. Polym. Sci., 132, 41939 (2015).
S.M. Noh, J.H. Nam, J. Oh, H.W. Jung, “Scratch and recovery characteristics of automotive clearcoats containing blocked polyisocyanate crosslinkers,” J. Coat. Technol. Res., 12(1), 85-95 (2015).
J.W. Hwang, K.N. Kim, S.M. Noh, H.W. Jung, “The effect of thermal radical initiator derived from O-imino-isourea on thermal curing characteristics and properties of automotive clearcoats,” J. Coat. Technol. Res., 12(1), 177-186 (2015).
S.Y. An*, D.G. Lee*, Lee, J.W. Hwang, K.N. Kim, J.H. Nam, S.M. Noh, H.W. Jung, J. Oh, “Photo-induced thiol-ene polysulfide-crosslinked materials with tunable thermal and mechanical properties,” J. Polym. Sci. Part A, 52(21), 3060-3068 (2014).
S. Shin, J.M. Lee, J.W. Hwang, H.W. Jung, N.S. Nho, K.B. Lee, “Physical and rheological properties of deasphalted oil produced from solvent deasphalting,” Chem. Eng. J., 257, 242-247 (2014).
J.Y. Lee, M.S. Yi, H.C. Jeong, J.T. Kim, J.H. Nam, S.M. Noh, H.W. Jung, “Characterization of clearcoats containing phosphoric acid-functionalized acrylic polyols for automotive pre-coated metal sheet coatings,” J. Coat. Technol. Res., 11, 697-710 (2014).
J. Choi, J.-W. Choi, D.J. Suh, J.-M. Ha, J. W. Hwang, H.W. Jung, K.Y. Lee, H-C Woo, “Production of brown algae pyrolysis oils for liquid biofuels depending on the chemical pretreatment methods,” Energy Conversion and Management, 86, 371-378 (2014).
S. Park, J.W. Hwang, K.N. Kim, G.S. Lee, J.H. Nam, S.M. Noh, H.W. Jung, “Rheology and curing characteristics of dual-curable clearcoats with hydroxyl functionalized urethane methacrylate oligomer: Effect of blocked isocyanate thermal crosslinkers,” Korea-Australia Rheology J., 26, 159-167 (2014).
N. Chan, H.W. Jung, S.M. Noh, J. Oh, “Functional amphiphilic oligo(ethylene oxide) methacrylate based block copolymers: synthesis by ARGET ATRP and aqueous mecellization,” Polym. Int., 63, 858-867 (2014).
S.H. Lee, S.J. Kim, J. Nam, H.W. Jung, J.C. Hyun, “Effect of sloped die lip geometry on the operability window in slot coating flows using viscocapillary and two-dimensional models,” Journal of Coatings Technology and Research, 11(1), 47-55 (2014).
G.H. Han*, S.H. Lee*, W-G Ahn, J. Nam, H.W. Jung, “Effect of shim configuration on flow dynamics and operability windows in stripe slot coating process,” Journal of Coatings Technology and Research, 11(1), 19-29 (2014).
S.Y. An, J.W. Hwang, K.N. Kim, H.W. Jung, S.M. Noh, J. Oh, “Multifunctional linear methacrylate copolymer polyenes having pendant vinyl groups: synthesis and photo-induced thiol-ene crosslinking polyaddition,” J. Polym. Sci.-Polym. Chem., 52, 572-581 (2014).
J.Y. Lee, J.M. Sung, K. Yoon, M.-S. Chun, H.W. Jung, “Debye screening effect on scaling behavior of longest relaxation time of biological polyelectrolyte chain,” Bull. Korean Chem. Soc., 34, 3703-3708 (2013).
Q. Zhang, J.W. Hwang, K.N. Kim, H.W. Jung, S.M. Noh, J.K. Oh, “New photo-induced thiol-ene crosslinked films based on linear methacrylate copolymer polythiols,” J. Polym. Sci. Part A: Polym. Chem., 51, 2860-2868 (2013).
J.W. Hwang, K.N. Kim, G.S. Lee, J.H. Nam, S.M. Noh, H.W. Jung, “Rheology and curing characteristics of dual-curable automotive clearcoats using thermal radical initiator derived from O-imino-isourea and photo-initiator,” Prog. Org. Coat., 76, 1666-1673 (2013).
I.J. Lee, S. Park, S.M. Noh, H.W. Jung, J.M. Park, “Rheology and roll coating dynamics of metallic basecoats for automotive pre-coated metal sheet,” Prog. Org. Coat., 76, 917-923 (2013).
J.Y. Lee*, J.W. Hwang*, H.W. Jung, S.H. Kim, S.J. Lee, K. Yoon, D. Weitz, “Fast dynamics and relaxation of colloidal drops during the drying process using multi-speckle diffusing wave spectroscopy,” Langmuir, 29(3), 861-866 (2013).
J.Y. Lee, H.W. Jung, J.C. Hyun, “Rotational relaxation time of polyelectrolyte xanthan chain using single molecule tracking method” Korea-Australia Rheology Journal, 24, 333-337 (2012).
Q. Ziang, S.M. Noh, J.H. Nam, H.W. Jung, J.M. Park, J.K. Oh, “Dual temperature and thiol-responsive POEOMA-multisegmented polydisulfides: Synthesis and thermoresponsive properties,” Macromol. Rapid Comm., 33, 1528-1534 (2012).
J.Y. Lee, M.-S. Chun, H.W. Jung, J.C. Hyun, “Conformational dynamics of sub-micron sized wormlike polyelectrolyte polymer in flow fields,” Macromolecular Research, 20, 1163-1172 (2012).
H. Son, H. Jin, S.R. Choi, H.W. Jung, S. Park, “IR probing of ion pairing equilibrium and dynamics of metal-selenocyanate ion pairs in N,N-dimethylformamide solutions,” J. Phys. Chem. B, 116, 9152-9159 (2012).
Y. Kim, D. Kim, I. Kwon, H.W. Jung, J. Cho, “Solvent-free inorganic nanoparticle fluids with highly conductive or fluorescent properties allowing layer-by-layer assembly,” J. Materials Chemistry, 22, 11488-11493 (2012).
H. Koh*, I. Kwon*, H.W. Jung, J.C. Hyun, “Operability window of slot coating using viscocapillary model for Carreau-type coating liquids,” Korea-Australia Rheology J., 24, 135-139 (2012).
S.M. Noh, J. Min, J.W. Lee, H.W. Jung, and J.M. Park, “The application of dual-function microgels in UV/thermal dual-cure clear coats,” J. Appl. Polym. Sci., 126, E493-E500 (2012).
J. Nam, H. Lim, D. Kim, H.W. Jung, and S. Shin, “Continuous separation of microparticles in a microfluidic channel via the elasto-inertial effect of non-Newtonian fluid,” Lab on a Chip, 12, 1347-1354 (2012).
H.M. Kim, J.S. Lee, H.W. Jung, and J.C. Hyun, “Frequency response analysis of non-isothermal film blowing process using transient simulation,” J. Appl. Polym. Sci., 123(5) 3028-3035 (2012).
S.M. Noh, J.W. Lee, J.H. Nam, J.M. Park, H.W. Jung, “Analysis of scratch characteristics of automotive clearcoats using carwash and nano-scratch tests,” Progress in Organic Coatings, 74, 192-203 (2012).
S.M. Noh, J.W. Lee, J.H. Nam, K.H. Byun, J.M. Park, H.W. Jung, “Dual-curing behavior and scratch characteristics of hydroxyl functionalized urethane methacrylate oligomer for automotive clearcoats,” Progress in Organic Coatings, 74, 257-269 (2012).
2006-2011
J.H. Kim, I.J. Lee, S.M. Noh, C.Y. Kang, J.H. Nam, H.W. Jung, J.M. Park, “Dynamics and instability of a polymeric paint in roll coating process for automotive pre-coating application,” Polymer (Korea), 35(6), 574-579 (2011).
S.H. Lee, S.I. Youn, J.S. Lee, H.W. Jung, J.C. Hyun, “Effect of air pressure difference on the stability and sensitivity in simplified curtain drawing flow,” J. Chem. Eng. Japan, 44, 524-528 (2011).
I.Y. Kwon, H.W. Jung, and J.C. Hyun, “Application of continuation method for tracking steady-state contours in viscoelastic film blowing,” Korea-Australia Rheology J., 23, 113-117 (2011).
H.W. Jung, J.S. Lee, “Nonlinear dynamics and chaotic motion in the isothermal film casting process,” Korea-Australia Rheol. J., 23, 59-65 (2011).
S.H. Lee, H.J. Koh, B.K. Ryu, S.J. Kim, H.W. Jung, J.C. Hyun, “Operability coating windows and frequency response in slot coating flows using a viscocapillary model,” Chem. Eng. Sci., 66, 4953-4959 (2011).
J.Y. Lee, H.W. Jung, J.C. Hyun, M-S Chun, “Lateral displacement of DNA molecule in abrupt 90o microbends,” J. Korean Physical Society, 58, 125-131 (2011).
D. Jo, J. Jeon, J.W. Hwang, J.Y. Lee, H.W. Jung, S.H. Kim, “Optimization of physical parameters of solid oxide fuel cell electrode using electrochemical model,” Korean J. Chem. Eng., 28, 1844-1850 (2011).
J.W. Hwang, J.Y. Lee, D.H. Cho, H.W. Jung, S.H. Kim, “Polarization Characteristics and Fuel Utilization in Anode-supported Solid Oxide Fuel Cell Using Three-dimensional Simulation,” Korean J. Chem. Eng., 28, 143-148 (2011).
A.R. Cho, D.M. Shin, H.W. Jung, J.C. Hyun, J.S. Lee, D. Cho, and Y.L. Joo, “Effect of annealing on the crystallization and properties of electrospun PLA and nylon 6 fibers,” J. Appl. Polym. Sci., 120, 752-758 (2011).
J.S. Lee, H.W. Jung, and J.C. Hyun, “Nonlinear dynamic behavior of nonisothermal film blowing process under the condition of constant bubble pressure,” AIChE J., 57(12), 3565-3570 (2011).
J.S. Lee, H.W. Jung, and J.C. Hyun, “Transient solutions of nonlinear dynamics in film blowing accompanied by on-line crystallization,” J. Rheol., 55, 257-271 (2011).
J.H. Lee, S.K. Han, J.S. Lee, H.W. Jung, and J.C. Hyun, “Ribbing instability in rigid and deformable forward roll coating flows,” Korea-Australia Rheol. J., 22, 75-80 (2010).
H.H. Lee, Y.S. Song, J.Y. Lee, H.W. Jung, and S.W. Kim, “Rheological properties of culture broth of Acremonium chrysogenum M35 in baffled flasks with glass beads,” Korea-Australia Rheol. J., 22, 52-58 (2010).
J.H. Yun, M-S Chun, and H.W. Jung, “The geometry effect on steady electrokinetic flows in curved rectangular microchannels,” Phys. Fluids, 22, 052004 (2010).
H.Y. Park, J.W. Hwang, K.T. Park, S. Kim, Y.U. Jeong, H.W. Jung, and S.H. Kim, “Effect of process conditions on dynamics and performance of PEMFC: Comparison with experiments,” Thin Solid Films, 518(22), 6505-6509 (2010).
J.H. Yun, D.M. Shin, J.S. Lee, H.W. Jung, J.C. Hyun, “Sensitivity of spinning process with flow-induced crystallization kinetics using frequency response method,” Korean J. Chem. Eng., 27(1), 37-44 (2010).
S.K. Han, D.M. Shin, H.Y. Park, H.W. Jung, J.C. Hyun, “Effect of viscoelasticity on dynamics and stability in roll coatings,” European Physical Journal-Special Topics, 166, 107 (2009).
S.W. Choi, D.M. Shin, J.S. Lee, J. M. Kim, H.W. Jung, J.C. Hyun, “Transient response of two-dimensional viscoelastic film casting processes to sinusoidal disturbances,” Korean J. of Chem. Eng., 26, 26 (2009).
J.H. Yun, D.M. Shin, J.S. Lee, H.W. Jung, J.C. Hyun, “Direct calculation of limit cycles of draw resonance and their stability in spinning process,” J. Society of Rheology, Japan, 36(3), 132-136 (2008).
J.Y. Lee, B.K. Ryu, J.S. Lee, H.W. Jung, J.C. Hyun, “Conformation of single DNA molecule in a slot coating flow,” Korea-Australia Rheology J., 20(2), 89-94 (2008).
J.S. Lee, D.M. Shin, H.W. Jung, J.C. Hyun, “Transient solutions of dynamics in fiber spinning and film casting accompanied by flow-induced crystallization,” J. Central South University of Tech., 14, 393-396 (2007).
J.S. Lee, D.M. Shin, H.W. Jung, J.C. Hyun, “Stability analysis of a three-layer film casting process,” Korea-Australia Rheology J., 19(1), 27-33 (2007).
D.M. Shin, J.S. Lee, H.W. Jung, J.C. Hyun, “Multiplicity, bifurcation, stability and hysteresis in dynamic solutions of film blowing process,” J. Rheology, 51, 605-621 (2007).
D.M. Shin, J.S. Lee, H.W. Jung, J.C. Hyun, “Transient and steady-state solutions of 2-D viscoelastic non-isothermal simulation model of film casting process via finite element method,” J. Rheology, 51, 393-407 (2007).
H.W. Jung, Y.U. Jeong, “Electrochemical properties of various transition metal compounds for energy storage,” Studies in Surface Science and Catalysis, 159, 633-636 (2006).
J.S. Lee, D.M. Shin, H.-S. Song, H.W. Jung, J.C. Hyun, “Existence of optimal cooling conditions in the film blowing process,” 137, 24-30, J. Non-Newtonian Fluid Mech. (2006).
D.M. Shin, J.S. Lee, H.W. Jung, J.C. Hyun, “High-speed fiber spinning process with spinline flow-induced crystallization and neck-like deformation,” Rheologica Acta, 45, 575-582 (2006).
S.I. Youn, S.Y. Kim, D.M. Shin, J.S. Lee, H.W. Jung, J.C. Hyun, “A review on viscocapillary models of pre-metered coating flows,” Korea-Australia Rheology J., 18(4), 209-215 (2006).
2002-2005
J.S. Lee, H.W. Jung, J.C. Hyun, L. E. Scriven, “A simple indicator of draw resonance instability in melt spinning processes,” AIChE J., 51(10), 2869-2874 (2005).
J. S. Lee, D. M. Shin, H. W. Jung, J. C. Hyun, and Y. U. Jeong, “Frequency Response Method to Determine the Stability of the Viscoelastic Spinning Processes,” J. Society of Rheology, Japan, 33(4), 215-218 (2005).
D. M. Shin, J. S. Lee, H. W. Jung, and J. C. Hyun, “Analysis of the Effect of flow-induced crystallization on the stability of low-speed spinning using the linear stability method,” Korea-Australia Rheology J., 17(2), 63-69 (2005).
J. S. Lee, D. M. Shin, H. W. Jung, and J. C. Hyun, “Transient Solutions of the Dynamics in Fiber Spinning Process Accompanied by Flow-induced Crystallization,” J. Non-Newtonian Fluid Mech., 130, 110-116 (2005).
J. M. Kim, J. S. Lee, H. W. Jung, and J. C. Hyun, “Transient Solutions of the Dynamics of Film Casting Process Using a 2-D Viscoelastic Model”, J. Non-Newtonian Fluid Mech., 132, 53-60 (2005).
J. S. Lee, H. W. Jung, and J. C. Hyun, “Stabilization of Film Casting by an Encapsulation Extrusion Method,” J. Non-Newtonian Fluid Mech., 117, 109 (2004).
J. C. Hyun, H. Kim, J. S. Lee, H.-S. Song, and H. W. Jung, “Transient Solutions of the Film Blowing Dynamics,” J. Non-Newtonian Fluid Mech., 121, 157-162 (2004).
H. W. Jung, J. S. Lee, J. C. Hyun, S. J. Kim, and L. E. Scriven, “Simplified Modeling of Slide-fed Curtain Coating Flow,” Korea-Australia Rheology J., 16, 227-233 (2004).
H. W. Jung, J. S. Lee, L. E. Scriven, and J. C. Hyun, “The Sensitivity and Stability of Spinning Process Using Frequency Response Method,” Korean J. of Chem. Eng., 21(1), 20-26 (2004).
J. S. Lee, H. W. Jung, and J. C. Hyun, ”Frequency Response of Film Casting Process,“ Korea-Australia Rheology J., 15(2), 91-96 (2003).
-2002
H.W. Jung, J. S. Lee, and J. C. Hyun, “Sensitivity analysis of melt spinning process by frequency response,” Korea-Australia Rheology Journal, 14 (2), 57-62 (2002).
H.W. Jung, D. Won, and C. Kim, “Hydrodynamic Interaction between Two Cylinders in Planar Shear Flow of Viscoelastic Fluid,” Korea-Australia Rheology Journal, 14(4), 203-207 (2002).
J.S. Lee, H. W. Jung, H.-S. Song, K.-Y. Lee, and J. C. Hyun, “Kinematic Waves and Draw Resonance in Film Casting Process,” J. Non-Newtonian Fluid Mech., 101, 43 (2001).
Lee, J.S., H.W. Jung, S. H. Kim, and J. C. Hyun, “Effect of Fluid Viscoelasticity on the Draw Resonance Dynamics of Melt Spinning,” J. Non-Newtonian Fluid Mech., 99, 159-166 (2001).
H. W. Jung, H.-S. Song, and J. C. Hyun, “Draw Resonance and Kinematic Waves in Viscoelastic Isothermal Spinning,” AIChE J., 46 (10), 2106 (2000).
J. S. Lee, H. W. Jung, and J. C. Hyun, “Melt Spinning Dynamics of Phan-Thien Tanner Fluids,” Korea-Australia Rheology Journal, 12 (2), 119 (2000).
H. W. Jung, S. M. Choi, and J. C. Hyun, “Approximate Method for Determining the Stability of Film Casting Process,” AIChE J., 45, 1157 (1999).
H. W. Jung, H.-S. Song, and J. C. Hyun, “Analysis of the Stabilizing Effect of Spinline Cooling in Melt Spinning,” J. Non-Newtonian Fluid Mech., 87, 165 (1999).
H. W. Jung and J. C. Hyun, “Stability of Isothermal Spinning of Viscoelastic Fluids,” Korean J. of Chem. Eng., 16, 325 (1999).
H.S. Lee, W. H. Jung, H. W. Jung, W. N. Kim, and J. C. Hyun, “Properties of Blends of Polycarbonate and a Thermotropic Liquid Crystalline Polymer,” Polymer (Korea), 20, 813 (1996).
H.W. Jung, B.J. Jeong, W. N. Kim, J.C. Hyun, “A rheological/Morphological study on the blends of thermotropic liquid crystalline polymers and thermoplastic polymers,” Korean J. of Rheology, 8, 92 (1996).
H.W. Jung, J.S. Lee, W.N. Kim, J.C. Hyun, “A Study on Rheological Properties of Polypropylene/Polycarbonate Blends,”Korean J. of Rheology, 8, 119 (1996).
H.W. Jung, K. Cho, and J.C. Hyun, “The Effect of Extensional Flow on the Morphology of Polyblends Containing a Liquid Crystalline Polymer,” Korean J. of Rheology, 9, 111 (1997).
H.W. Jung, J. S. Lee, and J. C. Hyun, “Frequency Response for Stability and Sensitivity Analyses in Viscoelastic Spinning Process,” Transport Phenomena, 17, 29 (2003).
정현욱, “코팅 공정 기술,” NICE, 22, 32 (2004).
김수연, 정현욱, “Slot 코팅 공정,” NICE, 23(5), 524-529 (2005).
조두환, 이재륭, 김학율, 정현욱, “Roll코팅 공정에서 수지 부착량 제어 모델 연구,” POSCO 연구논문, 11(1) 128-137 (2006).
J.Y. Kim, H. Lee, H.S. Kim, H.W. Jung, D.K. Choi, “Facilitated Transport Membrane for Ethylene/Ethane and Propylene/Propane Separation,” Clean Technology, 13(1), 79-84 (2007).
J.W. Hwang, J.Y. Lee, D.H. Jo, H.W. Jung, S.H. Kim, “Effect of Interconnect Structure on the Cell Performance in Anode-supported Tubular SOFC Using Three-dimensional Simulation,” Clean Technology, 16, 297-303 (2010).
S.H. Lee, H.J. Koh, S.H. Shim, H.W. Jung, J.C. Hyun, “An optimal die design for the coating uniformity of Non-Newtonian liquids in slot coating process,” Korean Chemical Engineering Research, 49(3), 314-319 (2011).
C.Y. Kang, J.Y. Lee, S.M. Noh, J.H. Nam, J.M. Park, H.W. Jung, S.S. Yu, “Study for synthesis and properties of polyurethane based on polyester polyol with varying hydroxyl values for automotive pre-painted metal sheet applications,” J. Adhesion and Interface, 12, 34-42 (2011).
정현욱, “환경친화적 자동차 선도장 강판 제조 및 모듈화 기술 개발,” NICE, 30, 678 (2012).
이동근, 황지원, 김경남, 노승만, 정현욱, “자동차 선도장 강판용 베이스코트의 유변학적 특성 및 롤코팅 동적 거동,” 접착 및 계면, 16(1), 15-21 (2015).
이관영, 이기봉, 정현욱, 최정규, 이대원, “초저에너지-초저배출 자동차 기술 개발: 2그룹: 다기능 촉매/흡착제 일체형 필터 개발,” NICE, 35(4), 409-413 (2017).
현재천, 정현욱, 송현섭, 김현철, 이주성, 신동명, “휠름 블로잉 공정의 동적 모사와 과도해 계산 도출 방법” 대한민국 특허등록 (10-0701303-0000) (2007).
Hyun, J.C., H. W. Jung, H.-S. Song, H. Kim, J.S. Lee, D. M. Shin, “A method for solving transient solution and dynamics in film blowing process,” PCT, PCT/KR2005/000431 (2005). US 2007/0179765 (2007)
정현욱, 현재천, 이주성, 신동명, 윤장호, “고분자 공정에서 발생하는 연신공명 불안정성 분석 방법 및 이를 기록한 기록매체, 대한민국 특허출원(10-2007-0106344) (2007)
정현욱, 현재천, 이주성, 신동명, 윤장호, “고분자 공정에서 발생하는 연신공명 불안정성 분석 방법 및 이를 기록한 기록매체, 대한민국 특허 등록(10-0907087) (2009)
정현욱, 현재천, 신동명, 최승원, 이주성, “고분자 휠름 가공 공정의 민감도 분석,” 대한민국 특허등록 (10-1068072) (2011)
정현욱, 현재천, 황지원, 이정용, “고분자 전해질막 연료전지용 전극-막 접합체의 균일코팅을 위한 슬롯 코팅 다이 내부 설계방법 및 슬롯 코팅 다이 장치 (Design method of internal die structure and slit coating die apparatus for uniform coating of MEA in PEMFC),” 대한민국 특허등록 (10-1201937) (2012)
권승범, 함형택, 채성석, 오세원, 정현욱, “탄성 및 가공성이 우수한 에틸렌공중합체” 대한민국 특허등록 (10-2012-00068383) (2013).
“Ethylene copolymer with improved elasticity and processibility,” US 출원번호 13/182.121. (2011.7월 13일), Taiwan 100124921 (2011), PCT KR2011/005227 (2011).
S.M. Noh, J.-W. Lee, J.H. Nam, H.W. Jung, “Highly scratch resistant one-part clear coating composition comprising silane-modified blocked isocyanate for cars,” US 13/335,800 (2011), Japan 특허 (2011-2803002) (2011).
박백성, 정현욱, “유변 특성 측정 장치 및 이를 이용한 컬러필터 내 미세패턴 형성공정 (Rheological Properties Measuring Device and Process for Forming for Micro Pattern in Color Filter Using the Same) (대한민국 특허출원 2015-0041762)
박성준, 이정현, 정현욱, 안원기, 최완석, 이용우, “듀얼(이중층)-슬롯코팅 기술을 이용한 복합 분리막의 단일 제조공정 (One-step fabrication of thin film composite membrane using a dual-layer slot coating),” 대한민국 특허출원 10-2015-0190720 (2015)
안원기, 김광림, 정현욱, “비뉴튼성 코팅액의 균일 분포를 위한 슬롯 다이 내의 심 및 이를 포함하는 슬롯 다이 코터 (Shim for the uniform coating distribution of non-Newtonian coating liquids in side slot die and slot die coater including the same),” 대한민국 특허등록 10-1841346 (2018)
정현욱, 이관영, 안원기, 박백성, “점착력 및 탄성율이 다른 점착층을 포함하는 필름 및 이의 제조 방법,” 특허등록 10-1806730 (2017)
정현욱, 권일영, 이창훈, 안원기, 이관영, “공압출 공법을 이용한 생분해성 고분자 박막 제조 방법,” 대한민국 특허출원 10-2016-0176818 (2016)
정현욱, 전병진, 이관영, 박진석, 이기욱, 안원기, “코팅 비드 영역이 개선된 슬롯 코팅 장치,” 대한민국 특허출원 10-2017-0158882 (2017)
이정현, 정현욱, 최완석, 신민규, 이종석, 원영준, 이다혜, “내오염 특화 패턴 구조를 가지는 박막 복합체 분리막의 제조 공정,” 대한민국 특허출원 10-2017-0111761 (2017).
W. Jung, Byoung Jin Chun, Kwan-Young Lee, Jin Seok Park, Gi Wook Lee, Won Gi Ahn, “Slot coating apparatus with improved coating bead region,” 미국 특허 출원, 1602370 (2018)
설수원, 황지석, 박진석, 안원기, 정현욱, “슬롯 다이,” 국내특허출원 10-2018-0174038 (2018.12.31.)
정현욱, 안원기, 김용호, 박진석, 배주혜, 엄혜리, 정민영, “이차전지 전극 제조용 슬롯 다이,” 대한민국 특허출원 10-2019-0149286 (2019.11.20)
정현욱, 전병진, 이관영, 박진석, 이기욱, 안원기, “코팅 비드 영역이 개선된 슬롯 코팅 장치,” 대한민국 특허등록 10-1990704 (2019.06.12)
이정현, 정현욱, 최완석, 신민규, 이종석, 원영준, 이다혜, “내오염 특화 패턴 구조를 가지는 박막 복합체 분리막의 제조 공정,” 대한민국 특허등록 10-1979567 (2019.05.13.)
W. Jung, Byoung Jin Chun, Kwan-Young Lee, Jin Seok Park, Gi Wook Lee, Won Gi Ahn, “Slot coating apparatus with improved coating bead region,” 미국 특허 등록 US.10525498.B2 (2020.01.07.)
정현욱, 안원기, 김용호, 박진석, 배주혜, 엄혜리, 정민영, “SLOT DIE FOR MANUFACTURING RECHARGEABLE BATTERY ELECTRODE,” 미국 특허 출원 16-952354 (2020.11.19.)
정현욱, 이관영, 전병진, 유태형, 박진석, “콜로이드 필름의 건조 공정 간 수직 방향 입자 분포 예측 방법 및 장치,” 대한민국 특허 출원 10-2020-0010514 (2020.01.29) 특허 등록 (2022.09.28.)
정현욱, 이관영, 전병진, 이기욱, 박진석, 유태형, “콜로이드 필름의 건조 크랙 평가 장치 및 방법,” 대한민국 특허등록 (10-2150209-0000) (2020.08.25.)
이정현, 정현욱, 박성준, 안원기, 최완석, 이용우, “THE ONE-STEP PREPARATION PROCESS FOR THIN FILM COMPOSITE MEMBRANE USING DUAL (DOUBLE LAYER)-SLOT COATING TECHNIQUE,” 중국 특허 등록 (CN.108348866.B) (2021.05.25.)
정현욱, 이관영, 전병진, 박진석, 유태형, “전단담화 유체 슬랏 코팅에서의 미드-갭 인베이젼 평가 방법 및 장치,” 대한민국 특허등록 10-2276722-0000 (2021.07.07.)
안원기, 김용호, 박진석, 배주혜, 엄혜리, 정민영, 정현욱 “SLOT DIE FOR MANUFACTURING RECHARGEABLE BATTERY ELECTRODE,” 미국 특허 US 2021/0151732 A1 (2021.05.20.)
정현욱, 이관영, 전병진, 유태형, 박진석, “콜로이드 필름의 건조 공정 간 수직 방향 입자 분포 예측 방법 및 장치,” 대한민국 특허 등록 10-2450552 (2022.09.28.)
정현욱, 전병진, 이관영, 이기욱, 박진석, 윤진성, “콜로이드 필름 표면의 평가 방법 및 장치,” 대한민국 특허 등록 10-2433027 (2022.08.11.)
정현욱, 이주성, 현재천, “제 6 장 신장 흐름계의 유변학,” 유변학의 이론과 응용 (단행본), 한국유변학회 (2001).
H.W. Jung, J.C. Hyun, “Chapter 11: Fiber Spinning and Film Blowing Instabilities,” in Polymer Processing Instabilities: Control and Understanding, Marcel Dekker, Inc., New York (2005).
H.W. Jung, J.C. Hyun, “Instabilities in extensional deformation polymer processing,” Rheology Review 2006 (2006).