메뉴 건너뛰기

CFEL

Publication

SCI(E) Journal

[2020- ]

C.H. Yoo*, G.W. Lee*, W. Choi, M.G. Shin, C. Lee, J.H. Shin, Y. Son, B. Chun, J.-H. Lee, H.W. Jung, J.S. Lee, "Identifying the colloidal fouling behavior on the sharkskin-mimetic surface: In-situ monitoring and lattice Boltzmann simulation," Chemical Engineering J., 405, 126617 (2021).

 

Y.-G. June, K.I. Jung, T.H. Lee, M. Ha, S.M. Noh, H.W. Jung, "Effect of isocyanate crosslinkers blocked with amine derivatives on rheological and crosslinking characteristics of automotive clearcoats," submitted (2020). 

 

M. Choi, M.G. Kim, K.I. Jung, T.-H. Lee, M. Ha, W. Hyung, H.W. JungS.M. Noh, "Reactivity and curing efficiency of isocyanate crosslinkiers with imidazole-based blocking agents for low-temperature curing of automotive clearcoats," Coatings, 10, 974 (2020). 

 

Y.-G. June, K.I. Jung, M. Choi, T.-H. Lee, S.M. Noh, H.W. Jung, "Effect of urethane crosslinking by blocked isocyanates with pyrazole-based blocking agents on rheological and mechanical performance," Coatings, 10, 961 (2020). 

 

J. Oh*, S.H. Kim*, K.I. Jung, J. Huh, H.W. Jung, J. Bang, "Effect of photo-initiators on the crosslinking behavior of organic thin films and their applicability to flexible display encapsulation layer," Polymer-Korea, Accepted (2020).

 

K.I. Jung, B.S. Park, S.J. Lee, S.M. Noh, H.W. Jung, "Effect of immiscible secondary fluid on particle dynamics and coffee ring characteristics during suspension drying," Materials, 13, 3438 (2020).

 

J. Sung, D.G. Lee, S. Lee, J. Park, H.W. Jung, "Crosslinking dynamics and gelation characteristics of photo and thermally polymerized poly(ethylene glycol) hydrogels," Materials, 13, 3277 (2020).

 

B.N. Jung, H.W. Jung, D.H. Kang, G.H. Kim, J.K. Shim, “Synergistic effect of cellulose nanofiber and nanoclay as distirbuted phase in a polypropylene based nanocomposite system," Polymers, 12, 2399 (2020).

 

T. Patel, M.P. Kim, J. Park, T.H. Lee, P. Nellepalli, S.M. Noh, H.W. Jung, H. Ko, J.K. Oh, "Self-healable reprocessable triboelectric nanogenerators fabricated with vitrimeric poly(hindered urea) networks," ACS Nano, 14, 11442-11451 (2020).

 

Y.-G. June*, K.I. Jung*, D.G. Lee, S. Jeong, T-H. Lee, Y.I. Park, S.M. Noh, H.W. Jung, “Influence of the functional group content of hydroxyl functionalized urethane methacrylate oligomers on the crosslinking features of clearcoats," J. Coat. Technol. Res., online published (2020).

 

T. Yoo, B. Chun, H.W. Jung, "Vertical drying model for colloidal films during rapid evaporation processes," Drying Technology, online published (2020).

 

H.W. Jung, "Special Issue on "Thin Film Processes" (Editorial), Processes, 8, 564-565 (2020).  

 

J. Kim, P.H. Hong, K. Choi, G. Moon, J. Kang, S. Lee, S. Lee, H.W. Jung, M.J. Ko, S.W. Hong, "A heterocyclic polyurethane with enhanced self-healing efficiency and outstanding recovery of mechanical properties", Polymers, 12, 968 (2020).

 

B.N. Jung, H.W. Jung, D.H. Kang, G.H. Kim, M. Lee, J.K. Shim, S.W. Hwang, “The fabrication of flexible and oxygen barrier celluose nanofiber/polylactic acid nanocomposites using cosolvent system," J. Appl. Polym. Sci., 137, e49536 (2020).

 

K. Yoon, H.W. Jung, M-S. Chun, "Determination of velocity profiles of Bird-Carreau fluids in curvilinear microchannel using random sample consensus," Korea-Aust. Rheol. J., 32, 159-164 (2020).

 

K. Yoon, H.W. Jung, M.-S. Chun, "Two-phase flow in microfluidic-chip design of hydronamic filtration for cell particle sorting," Electrophoresis, 41, 1002-1010 (2020).

 

D.G. Lee, S. Sung, D.G. Oh, Y.I. Park, S.-H. Lee, J.C. Kim, S.M. Noh, H.W.Jung,, "Application of polycarbonate diol containing hindered urea to polyurethane-based clearcoats for tuning of scratch-healing properties," J. Coat. Tech. Res., 17, 963-976 (2020).

 

C. Lee, G.W. Lee, W. Choi, C.H. Yoo, B. Chun, J.S. Lee, J.-H. Lee, H.W. Jung, "Pattern flow dynamics over rectangular Sharklet patterned membrane surfaces," Applied Surface Science, 514, 145961 (2020).

 

B.N. Jung, H.W. Jung, D. Kang, G.H. Kim, M. Lee, S.W. Hwang, J.K. Shim, "The fabrication of affinity improved nanocomposites with  plasma treated polypropylene and alkaline cellulose nanofiber suspension,Polymer Testing, 85, 106352 (2020).

 

K. Yoon, H.W. Jung, M-S. Chun, "Secondary Dean flow characteristics of inelastic Bird-Carreau fluids in curve microchannels," Korea-Australia Rheol. J., 32, 61-70 (2020).

 

S.H. Kim*, D.G. Lee*, J.W. Lee, D.G. Oh, I.Son, J.H. Lee, H. Kim, H.W. Jung, "Relationship between crosslinking and rheological/mechanical properties of UV curable coatings for automotive interior plastic parts," Polymer-Korea, 44, 38-48 (2020).

 

W. Choi, C. Lee, C.H. Yoo, M.G. Shin, G.W. Lee, T.-S. Kim, H.W. Jung, J.S. Lee, J.-H. Lee, "Structural tailoring of sharkskin-mimetic patterned reverse osmosis membranes for optimizing biofouling resistance," J. Membrane Science, 595, 117602 (2020).

 

M.J. Kim, G.-H. Han, S.H. Lee, H.W. Jung, J.W. Choung, C.H. Kim, K.-Y. Lee, "CeO2 promoted Ag/TiO2 catalyst for soot oxidation with improved active oxygen generation and delivery abilities," J. Hazardous Materials, 384, 121341 (2020).

 

B. Chun, T. Yoo, H.W. Jung, "Temporal evolution of concentration and microstructure of colloidal films during vertical drying: A lattice Boltzmann simulation study," Soft Matter, 16, 523-533 (2020). 

 

[2016-2019]

J. Oh, K.I. Jung, H.W. Jung, A. Khan, "A modular and practical synthesis of zwitterionic hydrogels through sequential amine-epoxy ‘click’ chemistry and N-alkylation reaction," Polymers, 11, 1491 (2019).

 

W.-G. Ahn*, S.H. Lee*, J. Nam, B. Chun, H.W. Jung, “Simultaneous analysis of die internal and external flows in slot coating process," J. Chem. Eng. Japan, 52(3), 253-258 (2019).

 

N.H. Kim, S. Yoon, K.I. Jung, D.G. Lee, J. BangH.W. Jung, “Crosslinking behaviors and mechanical properties of curable PDMS and PEG films with various contents of glycidyl methacrylate,” J. Appl. Polym. Sci., 136, 47088 (2019).

 

B. Chun, J.S. Park, H.W. Jung, Y.-Y. Won, "Shear-induced particle migration and segregation in non-Brownian bidisperse suspensions under planar Poiseuille flow," J. Rheol., 63(3), 437-453 (2019). 

 

K.I. Jung*, S.O. Hwang*, N.H. Kim, D.G. Lee, J.-H. Lee, H.W. Jung, "Effect of methacryloxypropyl and phenyl functional groups on crosslinking and rheological and mechanical properties of ladder-like polysilsesquioxane hard coatings," Prog. Org. Coat., 124, 129-136 (2018).

 

W. Choi*, C. Lee*, Y.J. Won*, D. Lee, G.W. Lee, M.G. Shin, T.-S. Kim, H.-D. Park, H.W. Jung, J.S. Lee, J.-H. Lee, "Sharkskin-mimetic water desalination membranes with ultralow biofouling," J. Mater. Chem. A, 6, 23034 (2018).

 

J. Hwang, D.G. Lee, H. Yeo, J. Rao, Z. Zhu, J. Shin, K. Jeong, S. Kim, H.W. Jung, A. Khan, "Proton transfer hydrogels: Versatility and applications," J. Am. Chem. Soc., 6700-6709 (2018).

 

S.H. Yoon*, D.G. Lee*, N.H. Kim, K.I. Jung, C.S. Lee, J.W. Lee, G.S. Lee, H.W. Jung, "Relationship between curing characteristics and rheological/mechanical properties of soft-feel coatings for automotive plastic parts," Polym.-Korea, 42, 303-310 (2018).

 

S.O. Hwang, A.S. Lee, S.-H. Park, J.-Y. Lee, K.I. Jung, H.W. Jung, J.-H. Lee, “Mechanical properties of ladder-like polysilsesquioxane-based hard coating films containing different organic functional groups,” Prog. Org. Coat., 121, 105-111 (2018).

 

K.I. Jung, B. Kim, D.G. Lee, T-H Lee, S.Y. Choi, J.C. Kim, S.M. NohY.I. ParkH.W. Jung“Characteristics of dual-curable blocked isocyanate with thermal radical initiator for low-temperature curing of automotive coatings,” Prog. Org. Coat., 125, 160-166 (2018). 

 

B.S. Park, K.I. Jung, S.J. Lee, K.-Y. Lee, H.W. Jung, “Effect of particle shape on drying dynamics in suspension drops using multi-speckle diffusing wave spectroscopy,” Colloid Polym. Sci., 296, 971-979 (2018).

 

W.-G. Ahn, S. H. Lee, J. Nam, S.J. Kim, K.-Y. Lee, H.W. Jung, “Effect of upstream meniscus shape on dynamic wetting and operability limits of Newtonian coating liquids in slot coating bead flows,” J. Coat. Technol. Res., 15, 1067-1076 (2018).

 

I. Kwon, M.-S. Chun, B. ChunH.W. Jung, J.C. Hyun, "Particle migration in planar Couette-Poiseuille flows of concentrated suspensions," J. Rheology, 62, 419-435 (2018).

 

B.S. Park, K.H. Hyung, G.J. Oh, H.W. Jung, “Transitional analysis of organic thin color filter layers in displays during baking process using multi-speckle diffusing wave spectroscopy," Korea-Australia Rheol. J. (Invited paper for ISAR-2017), Korea-Australia. Rheol. J., 30(1), 11-19  (2018).

 

D.Y. Lee, G.W. Lee, K. Yoon, B. Chun, H.W. Jung, "Lattice Boltzmann simulations for wall-flow dynamics in porous ceramic diesel particulate filters," Appl. Surf. Sci., 429, 72-80 (2018).

 

B.S. Park, W.-G. Ahn, K.I. Jung, S.J. Lee, K.-Y. Lee, H.W. Jung, “Analysis of the drying behavior of suspension drops with spherical and ellipsoidal particles," Drying Technology, 36, 2022-2029 (2018).

 

B.S. Park, K.H. Hyung, G.J. Oh, H.W. Jung, "Dynamic change of color filter layer in baking process by multi-speckle diffusing wave spectroscopy," Chem. Eng. & Technol., 40, 2230-2237 (2017).

 

K. Yoon, H.W. Jung, M.-S. Chun, "Secondary flow behavior of electrolytic non-Newtonian fluids with Bird-Carreau model in curved microchannels," Rheol. Acta, 56, 915-926 (2017).

 

B. Chun*, I. Kwon*, H.W. Jung, J.C. Hyun, "Lattice Boltzmann simulation of shear-induced particle migration in plane Couette-Poiseuille flow: Local ordering of suspension," Phys. Fluids (Special Issue of INNFM-2017) (2017), 29, 121605 (2017).

 

J.S. Lee, I. Kwon, H.W. Jung J.C. Hyun, "Helical instability in film blowing process: Analogy to buckling instability," Phys. Fluids (Special Issue of INNFM-2017), 29, 121501 (2017).

 

Y.W. Lee, W.-G. Ahn, J. NamH.W. Jung, J.C. Hyun, "Operability windows in viscoelastic slot coating flows using a simplified viscoelastic-capillary model," Rheol. Acta, 56(9), 707-717 (2017).

 

Kevin I. Jung, D.G. Lee, K.W. Bong, S.M. Noh, M.S. Um, W.J. Choi, B. Kim, H.W. Jung, "Effect of solvents on the rheological and crosslinking properties of photo-polymerized poly(ethylene glycol) hydrogels," Korean J. Chem. Eng., 34(5), 1517-1523 (2017). 

 

J.H. Shim, H.J. Moon, H.W. Jung, K. Bong, "Fabrication of NOA microfluidic devices based on sequential replica molding," Korean J. Chem. Eng., 34(5), 1495-1499 (2017).

 

S.-J. Park*, W.-G. Ahn*, W. Choi, S.-H. Park, J.S. Lee, H.W. JungJ,-H. Lee, "A facile and scalable fabrication method for thin film composite reverse osmosis membranes: dual-layer slot coating," J. Mater. Chem. A, 5, 6648-6655 (2017).

 

I. Kwon, B. Chun, M.-S. Chun, H.W. Jung, J.C. Hyun, "Sensitivity analysis of two-dimensional viscoelastic film casting processes using transfer functions by transient frequency response method," Korea-Australia. Rheol. J., 29(1), 67-73 (2017).

 

I. Kwon, H.W. Jung, J.C. Hyun, "Stability windows for draw resonance instability in two-dimensional Newtonian and viscoelastic film casting processes by transient frequency response method," J. Non-Newtonian Fluid Mech., 240, 34-43 (2017).

 

D. Kim*, D.G. Lee*, J.C. Kim, C.S. Lim, N.S. Kong, H.W. Jung, S.M. Noh, Y.I. Park, "Effect of molecular weight of polyurethane toughening agent on adhesive strength and rheological characteristics of automotive structural adhesives," Int. J. Adhes. Addhes., 74, 21-27 (2017).

 

G.J. Oh, J.W. Hwang, S.J. Lee, K.W. BongH.W. Jung, "Particle dynamics and relaxation in bimodal polystyrene suspensions during drying using multi-speckle diffusing wave spectroscopy," AIChE J., 63(3), 1114-1121 (2017) 

 

W. Choi, E.P. Chan, J.-H. Park, W.-G. Ahn, H.W. Jung, S. Hong, J.S. Lee, J.-Y. Han, S. Park, D.-H. KoJ.-H. Lee,  "Nanoscale pillar-enhanced tribological surfaces as antifouling membranes," ACS Applied Materials & Interfaces, 8(45), 31433-31441 (2016).

 

D.G. Lee, S.Y. An, M.S. Um, W.J. Choi, S.M. Noh, H.W. JungJ.K Oh, "Photo-induced thiol-ene crosslinked polymethacrylate networks reinforced with Al2O3 nanoparticles," Polymer, 101, 119-126 (2016).

 

B. Kim*, D.G. Lee*, D.Y. Kim, H.J. Kim, N.S. Kong, J.C. Kim, S.M. NohH.W. JungY.I. Park, "Thermal radical initiator derivatives based on O-imino-isourea: Synthesis, polymerization, and characterization," J. Polym. Sci - Part A: Polym. Chem., 54, 3593-3600 (2016)

 

M.S. Um, D.S. Ham, S.G. Cho, S.J. Lee, K.J. Kim, J.H. Lee, S.-H. Choa, H.W. Jung, W.J. Choi, "Surface mechanical properties of poly(urethane acrylate)/silica hybrid interpenetrating polymer network (IPN) coatings," Prog. Org. Coat., 97, 166-174 (2016).

 

H.S. Ji, W.-G. Ahn, I. Kwon, J. Nam, H.W. Jung, "Operability coating window of dual-layer slot coating process using viscocapillary model," Chem. Eng. Sci., 143, 122-129 (2016).

 

I. Kwon, M.-S. Chun, H.W. Jung, J.C. Hyun, "Determination of draw resonance onsets in tension-controlled viscoelastic spinning process using transient frequency response method," J. Non-Newtonian Fluid Mech., 228, 31-37 (2016).

 

G. Jin, W.-G. Ahn, S.J. Kim, J. Nam, H.W. Jung, J.C. Hyun, "Effect of shim configuration on internal die flows for non-Newtonian coating liquids in slot coating process," Korea-Australia Rheol. J., 28(2), 159-164 (2016).

 

 

[2012-2015]

 

W.-G. Ahn, S. H. Lee, J. Nam, H.W. Jung, "Effect of flow rate variation on the frequency response in slot coating with upstream sloped die geometry," Korean J. Chem. Eng., 37(7), 1218-1221 (2015). 

 

J.W. Hwang, S.M. Noh, B. Kim, H.W. Jung, "Gelation and crosslinking characteristics of photo-polymerized poly(ethylene glycol) hydrogels," J. Appl. Polym. Sci., 132, 41939 (2015).

 

S.M. Noh, J.H. Nam, J. OhH.W. Jung, "Scratch and recovery characteristics of automotive clearcoats containing blocked polyisocyanate crosslinkers," J. Coat. Technol. Res., 12(1), 85-95 (2015).

 

J.W. Hwang, K.N. Kim, S.M. NohH.W. Jung, "The effect of thermal radical initiator derived from O-imino-isourea on thermal curing characteristics and properties of automotive clearcoats," J. Coat. Technol. Res., 12(1), 177-186 (2015).

 

S.Y. An*, D.G. Lee*, Lee, J.W. Hwang, K.N. Kim, J.H. Nam, S.M. Noh, H.W. Jung, J. Oh, "Photo-induced thiol-ene polysulfide-crosslinked materials with tunable thermal and mechanical properties," J. Polym. Sci. Part A, 52(21), 3060-3068 (2014).

 

S. Shin, J.M. Lee, J.W. Hwang, H.W. Jung, N.S. Nho, K.B. Lee, "Physical and rheological properties of deasphalted oil produced from solvent deasphalting," Chem. Eng. J., 257, 242-247 (2014).

 

J.Y. Lee, M.S. Yi, H.C. Jeong, J.T. Kim, J.H. Nam, S.M. NohH.W. Jung, "Characterization of clearcoats containing phosphoric acid-functionalized acrylic polyols for automotive pre-coated metal sheet coatings," J. Coat. Technol. Res., 11, 697-710 (2014).

 

J. Choi, J.-W. Choi, D.J. Suh, J.-M. Ha, J. W. Hwang, H.W. Jung, K.Y. Lee, H-C Woo, “Production of brown algae pyrolysis oils for liquid biofuels depending on the chemical pretreatment methods, Energy Conversion and Management, 86, 371-378 (2014). 

 

S. Park, J.W. Hwang, K.N. Kim, G.S. Lee, J.H. Nam, S.M. NohH.W. Jung, "Rheology and curing characteristics of dual-curable clearcoats with hydroxyl functionalized urethane methacrylate oligomer: Effect of blocked isocyanate thermal crosslinkers," Korea-Australia Rheology J., 26, 159-167 (2014).

 

N. Chan, H.W. Jung, S.M. Noh, J. Oh, "Functional amphiphilic oligo(ethylene oxide) methacrylate based block copolymers: synthesis by ARGET ATRP and aqueous mecellization," Polym. Int., 63, 858-867 (2014).

 

S.H. Lee, S.J. Kim, J. Nam, H.W. Jung, J.C. Hyun, "Effect of sloped die lip geometry on the operability window in slot coating flows using viscocapillary and two-dimensional models," Journal of Coatings Technology and Research, 11(1), 47-55 (2014).

 

G.H. Han*, S.H. Lee*, W-G Ahn, J. Nam, H.W. Jung, "Effect of shim configuration on flow dynamics and operability windows in stripe slot coating process," Journal of Coatings Technology and Research, 11(1), 19-29 (2014).

 

S.Y. An, J.W. Hwang, K.N. Kim, H.W. Jung, S.M. Noh, J. Oh, "Multifunctional linear methacrylate copolymer polyenes having pendant vinyl groups: synthesis and photo-induced thiol-ene crosslinking polyaddition," J. Polym. Sci.-Polym. Chem., 52, 572-581 (2014).

 

J.Y. Lee, J.M. Sung, K. Yoon, M.-S. Chun, H.W. Jung, "Debye screening effect on scaling behavior of longest relaxation time of biological polyelectrolyte chain," Bull. Korean Chem. Soc., 34, 3703-3708 (2013).

 

Q. Zhang, J.W. Hwang, K.N. Kim, H.W. Jung, S.M. Noh, J.K. Oh, "New photo-induced thiol-ene crosslinked films based on linear methacrylate copolymer polythiols," J. Polym. Sci. Part A: Polym. Chem., 51, 2860-2868 (2013).

 

J.W. Hwang, K.N. Kim, G.S. Lee, J.H. Nam, S.M. Noh, H.W. Jung, "Rheology and curing characteristics of dual-curable automotive clearcoats using thermal radical initiator derived from O-imino-isourea and photo-initiator," Prog. Org. Coat., 76, 1666-1673 (2013).

 

I.J. Lee, S. Park, S.M. Noh, H.W. Jung, J.M. Park, "Rheology and roll coating dynamics of metallic basecoats for automotive pre-coated metal sheet," Prog. Org. Coat., 76, 917-923 (2013).

 

J.Y. Lee*, J.W. Hwang*, H.W. Jung, S.H. Kim, S.J. Lee, K. Yoon, D. Weitz, "Fast dynamics and relaxation of colloidal drops during the drying process using multi-speckle diffusing wave spectroscopy," Langmuir, 29(3), 861-866 (2013).

 

J.Y. Lee, H.W. Jung, J.C. Hyun, "Rotational relaxation time of polyelectrolyte xanthan chain using single molecule tracking method" Korea-Australia Rheology Journal, 24, 333-337 (2012).

 

Q. Ziang, S.M. Noh, J.H. Nam, H.W. Jung, J.M. Park, J.K. Oh, "Dual temperature and thiol-responsive POEOMA-multisegmented polydisulfides: Synthesis and thermoresponsive properties," Macromol. Rapid Comm., 33, 1528-1534 (2012).

 

J.Y. Lee, M.-S. Chun, H.W. Jung, J.C. Hyun, Conformational dynamics of sub-micron sized wormlike polyelectrolyte polymer in flow fields, Macromolecular Research, 20, 1163-1172 (2012).

 

H. Son, H. Jin, S.R. Choi, H.W. Jung, S. Park, "IR probing of ion pairing equilibrium and dynamics of metal-selenocyanate ion pairs in N,N-dimethylformamide solutions," J. Phys. Chem. B, 116, 9152-9159 (2012).

 

Y. Kim, D. Kim, I. Kwon, H.W. Jung, J. ChoSolvent-free inorganic nanoparticle fluids with highly conductive or fluorescent properties allowing layer-by-layer assembly, J. Materials Chemistry, 22, 11488-11493 (2012).

 

H. Koh*, I. Kwon*, H.W. Jung, J.C. Hyun, Operability window of slot coating using viscocapillary model for Carreau-type coating liquids, Korea-Australia Rheology J., 24, 135-139 (2012).

 

S.M. Noh, J. Min, J.W. Lee, H.W. Jung, and J.M. ParkThe application of dual-function microgels in UV/thermal dual-cure clear coats, J. Appl. Polym. Sci., 126, E493-E500 (2012).

 

J. Nam, H. Lim, D. Kim, H.W. Jung, and S. ShinContinuous separation of microparticles in a microfluidic channel via the elasto-inertial effect of non-Newtonian fluid, Lab on a Chip, 12, 1347-1354 (2012).

 

H.M. Kim, J.S. Lee, H.W. Jung, and J.C. Hyun, Frequency response analysis of non-isothermal film blowing process using transient simulation, J. Appl. Polym. Sci., 123(5) 3028-3035 (2012).

 

S.M. Noh, J.W. Lee, J.H. Nam, J.M. Park, H.W. JungAnalysis of scratch characteristics of automotive clearcoats using carwash and nano-scratch tests, Progress in Organic Coatings, 74, 192-203 (2012).

 

S.M. Noh, J.W. Lee, J.H. Nam, K.H. Byun, J.M. Park, H.W. JungDual-curing behavior and scratch characteristics of hydroxyl functionalized urethane methacrylate oligomer for automotive clearcoats, Progress in Organic Coatings, 74, 257-269 (2012).

 

 

[2006-2011]

 

J.H. Kim, I.J. Lee, S.M. Noh, C.Y. Kang, J.H. Nam, H.W. Jung, J.M. Park, Dynamics and instability of a polymeric paint in roll coating

process for automotive pre-coating application, Polymer (Korea), 35(6), 574-579 (2011).

 

S.H. Lee, S.I. Youn, J.S. Lee, H.W. Jung, J.C. Hyun, Effect of air pressure difference on the stability and sensitivity in simplified curtain drawing flow, J. Chem. Eng. Japan, 44, 524-528 (2011).

 

I.Y. Kwon, H.W. Jung, and J.C. Hyun, Application of continuation method for tracking steady-state contours in viscoelastic film blowing, Korea-Australia Rheology J., 23, 113-117 (2011).

 

H.W. Jung, J.S. LeeNonlinear dynamics and chaotic motion in the isothermal film casting process, Korea-Australia Rheol. J., 23, 59-65 (2011).

 

S.H. Lee, H.J. Koh, B.K. Ryu, S.J. Kim, H.W. Jung, J.C. Hyun, Operability coating windows and frequency response in slot coating flows using a viscocapillary model, Chem. Eng. Sci., 66, 4953-4959 (2011).

 

J.Y. Lee, H.W. Jung, J.C. Hyun, M-S Chun, Lateral displacement of DNA molecule in abrupt 90o microbends, J. Korean Physical Society, 58, 125-131 (2011).

 

D. Jo, J. Jeon, J.W. Hwang, J.Y. Lee, H.W. Jung, S.H. KimOptimization of physical parameters of solid oxide fuel cell electrode using electrochemical model, Korean J. Chem. Eng., 28, 1844-1850 (2011).

 

J.W. Hwang, J.Y. Lee, D.H. Cho, H.W. Jung, S.H. Kim, "Polarization Characteristics and Fuel Utilization in Anode-supported Solid Oxide Fuel Cell Using Three-dimensional Simulation," Korean J. Chem. Eng., 28, 143-148 (2011).

 

A.R. Cho, D.M. Shin, H.W. Jung, J.C. Hyun, J.S. Lee, D. Cho, and Y.L. JooEffect of annealing on the crystallization and properties of electrospun PLA and nylon 6 fibers, J. Appl. Polym. Sci., 120, 752-758 (2011).

 

J.S. Lee, H.W. Jung, and J.C. Hyun, Nonlinear dynamic behavior of nonisothermal film blowing process under the condition of constant bubble pressure, AIChE J., 57(12), 3565-3570 (2011).

 

J.S. Lee, H.W. Jung, and J.C. HyunTransient solutions of nonlinear dynamics in film blowing accompanied by on-line crystallization, J. Rheol., 55, 257-271 (2011).

 

J.H. Lee, S.K. Han, J.S. Lee, H.W. Jung, and J.C. Hyun, Ribbing instability in rigid and deformable forward roll coating flows, Korea-Australia Rheol. J., 22, 75-80 (2010).

 

H.H. Lee, Y.S. Song, J.Y. Lee, H.W. Jung, and S.W. Kim, Rheological properties of culture broth of Acremonium chrysogenum M35 in baffled flasks with glass beads, Korea-Australia Rheol. J., 22, 52-58 (2010).

 

J.H. Yun, M-S Chun, and H.W. Jung, The geometry effect on steady electrokinetic flows in curved rectangular microchannels, Phys. Fluids, 22, 052004 (2010).

 

H.Y. Park, J.W. Hwang, K.T. Park, S. Kim, Y.U. Jeong, H.W. Jung, and S.H. Kim, Effect of process conditions on dynamics and performance of PEMFC: Comparison with experiments, Thin Solid Films, 518(22), 6505-6509 (2010).

 

J.H. Yun, D.M. Shin, J.S. Lee, H.W. Jung, J.C. Hyun, Sensitivity of spinning process with flow-induced crystallization kinetics using frequency response method, Korean J. Chem. Eng., 27(1), 37-44 (2010).

 

S.K. Han, D.M. Shin, H.Y. Park, H.W. Jung, J.C. Hyun, Effect of viscoelasticity on dynamics and stability in roll coatings, European Physical Journal-Special Topics, 166, 107 (2009).

 

S.W. Choi, D.M. Shin, J.S. Lee, J. M. Kim, H.W. Jung, J.C. Hyun, Transient response of two-dimensional viscoelastic film casting processes to sinusoidal disturbances, Korean J. of Chem. Eng., 26, 26 (2009).

 

J.H. Yun, D.M. Shin, J.S. Lee, H.W. Jung, J.C. Hyun, Direct calculation of limit cycles of draw resonance and their stability in spinning process, J. Society of Rheology, Japan, 36(3), 132-136 (2008).

 

J.Y. Lee, B.K. Ryu, J.S. Lee, H.W. Jung, J.C. Hyun, Conformation of single DNA molecule in a slot coating flow, Korea-Australia Rheology J., 20(2), 89-94 (2008).

 

J.S. Lee, D.M. Shin, H.W. Jung, J.C. HyunTransient solutions of dynamics in fiber spinning and film casting accompanied by flow-induced crystallization, J. Central South University of Tech., 14, 393-396 (2007).

 

J.S. Lee, D.M. Shin, H.W. Jung, J.C. Hyun, Stability analysis of a three-layer film casting process, Korea-Australia Rheology J., 19(1), 27-33 (2007).

 

D.M. Shin, J.S. Lee, H.W. Jung, J.C. HyunMultiplicity, bifurcation, stability and hysteresis in dynamic solutions of film blowing process, J. Rheology, 51, 605-621 (2007).

 

D.M. Shin, J.S. Lee, H.W. Jung, J.C. HyunTransient and steady-state solutions of 2-D viscoelastic non-isothermal simulation model of film casting process via finite element method, J. Rheology, 51, 393-407 (2007).

 

H.W. Jung, Y.U. JeongElectrochemical properties of various transition metal compounds for energy storage, Studies in Surface Science and Catalysis, 159, 633-636 (2006). (Non-SCI)

 

J.S. Lee, D.M. Shin, H.-S. Song, H.W. Jung, J.C. HyunExistence of optimal cooling conditions in the film blowing process, 137, 24-30, J. Non-Newtonian Fluid Mech. (2006).

 

D.M. Shin, J.S. Lee, H.W. Jung, J.C. HyunHigh-speed fiber spinning process with spinline flow-induced crystallization and neck-like deformation, Rheologica Acta, 45, 575-582 (2006).

 

S.I. Youn, S.Y. Kim, D.M. Shin, J.S. Lee, H.W. Jung, J.C. Hyun, A review on viscocapillary models of pre-metered coating flows, Korea-Australia Rheology J., 18(4), 209-215 (2006).

 

 

[2003-2005]

 

H.W. Jung, J. S. Lee, and J. C. Hyun, Sensitivity analysis of melt spinning process by frequency response, Korea-Australia Rheology Journal, 14 (2), 57 (2002).

 

J.S. Lee, H.W. Jung, J.C. Hyun, L. E. Scriven, A simple indicator of draw resonance instability in melt spinning processes, AIChE J., 51(10), 2869-2874 (2005).

 

J. S. Lee, D. M. Shin, H. W. Jung, J. C. Hyun, and Y. U. Jeong, Frequency Response Method to Determine the Stability of the Viscoelastic Spinning Processes, J. Society of Rheology, Japan, 33(4), 215-218 (2005).

 

D. M. Shin, J. S. Lee, H. W. Jung, and J. C. Hyun, Analysis of the Effect of flow-induced crystallization on the stability of low-speed spinning using the linear stability method, Korea-Australia Rheology J., 17(2), 63-69 (2005).

 

J. S. Lee, D. M. Shin, H. W. Jung, and J. C. Hyun, Transient Solutions of the Dynamics in Fiber Spinning Process Accompanied by Flow-induced Crystallization, J. Non-Newtonian Fluid Mech., 130, 110-116 (2005).

 

J. M. Kim, J. S. Lee, H. W. Jung, and J. C. Hyun, Transient Solutions of the Dynamics of Film Casting Process Using a 2-D Viscoelastic Model, J. Non-Newtonian Fluid Mech., 132, 53-60 (2005).

 

J. S. Lee, H. W. Jung, and J. C. HyunStabilization of Film Casting by an Encapsulation Extrusion Method, J. Non-Newtonian Fluid Mech., 117, 109 (2004).

 

J. C. Hyun, H. Kim, J. S. Lee, H.-S. Song, and H. W. Jung, Transient Solutions of the Film Blowing Dynamics, J. Non-Newtonian Fluid Mech., 121, 157-162 (2004).

 

H. W. Jung, J. S. Lee, J. C. Hyun, S. J. Kim, and L. E. Scriven, Simplified Modeling of Slide-fed Curtain Coating Flow, Korea-Australia Rheology J., 16, 227-233 (2004).

 

H. W. Jung, J. S. Lee, L. E. Scriven, and J. C. HyunThe Sensitivity and Stability of Spinning Process Using Frequency Response Method, Korean J. of Chem. Eng., 21(1), 20-26 (2004).

 

J. S. Lee, H. W. Jung, and J. C. Hyun,  Korea-Australia Rheology J., 15(2), 91-96 (2003).Frequency Response of Film Casting Process,

 

 

[~2002]

 

H.W. Jung, J. S. Lee, and J. C. Hyun, Sensitivity analysis of melt spinning process by frequency response, Korea-Australia Rheology Journal, 14 (2), 57-62 (2002). 

 

H.W. Jung, D. Won, and C. KimHydrodynamic Interaction between Two Cylinders in Planar Shear Flow of Viscoelastic Fluid, Korea-Australia Rheology Journal, 14(4), 203-207 (2002).  

 

J.S. Lee, H. W. Jung, H.-S. Song, K.-Y. Lee, and J. C. HyunKinematic Waves and Draw Resonance in Film Casting Process, J. Non-Newtonian Fluid Mech., 101, 43 (2001).

 

Lee, J.S., H.W. Jung, S. H. Kim, and J. C. HyunEffect of Fluid Viscoelasticity on the Draw Resonance Dynamics of Melt Spinning, J. Non-Newtonian Fluid Mech., 99, 159-166 (2001).  

 

H. W. Jung, H.-S. Song, and J. C. HyunDraw Resonance and Kinematic Waves in Viscoelastic Isothermal Spinning, AIChE J., 46 (10), 2106 (2000).

 

J. S. Lee, H. W. Jung, and J. C. HyunMelt Spinning Dynamics of Phan-Thien Tanner Fluids, Korea-Australia Rheology Journal, 12 (2), 119 (2000).

 

H. W. Jung, S. M. Choi, and J. C. HyunApproximate Method for Determining the Stability of Film Casting Process, AIChE J., 45, 1157 (1999).

 

H. W. Jung, H.-S. Song, and J. C. HyunAnalysis of the Stabilizing Effect of Spinline Cooling in Melt Spinning, J. Non-Newtonian Fluid Mech., 87, 165 (1999).

 

H. W. Jung and J. C. HyunStability of Isothermal Spinning of Viscoelastic Fluids, Korean J. of Chem. Eng., 16, 325 (1999).

 

H.S. Lee, W. H. Jung, H. W. Jung, W. N. Kim, and J. C. Hyun, Properties of Blends of Polycarbonate and a Thermotropic Liquid Crystalline Polymer, Polymer (Korea), 20, 813 (1996).  

 

위로